Durability / Performance Options
Durability / Performance
Gemini Industries is proud to announce the introduction of its new EVO Eclipse Line of waterborne coatings. The Eclipse line is the next generation of waterborne coatings using European Technologies and Resins.
The Eclipse line exhibits excellent durability as a single pack/mono-product. Eclipse’s dual cross-linking technology gives you the ability to increase; further its durability and chemical resistance by adding an optional hardener turning it into a 2K option. This optional hardener also helps in eliminating that dreaded tannin bleed.
For those of you who are currently using water-borne coatings and for those of you who are thinking about going water, this is the product line to take a serious look at. Contact your local Gemini representative, distributor, or paint store to determine all the details about Gemini’s new EVO Eclipse Water Borne Product Line.
Application Options
Gemini Industries’ new Water Borne Eclipse line has been designed to be very user-friendly. We have manufactured it to be ready to spray right out of the container. No extra reduction except in extreme conditions.
The Eclipse line can be applied using traditional cup guns, HVLP, Airless or Airmix systems.
Easy of application was one of our goals in developing this new waterborne line. Spraying vertically should not be a problem.
This new Eclipse Line is excellent for cabinet refinishers too. It has been tested over previously coated cabinets finished with everything from old school nitro to today’s 2K Urethanes. Thru this testing, we found that there was no need for a binding primer to be used.
Contact your local Gemini Rep, distributor, or paint store to determine all the details about Gemini’s new EVO Eclipse Water Borne Product Line.