Product Preparation & Application
Material Preparation:
Catalyze “V” Series White Conversion Varnish with pre-packaged catalyst kit in a stainless steel or plastic lined container. Mix or agitate thoroughly before use. Reduction may be required for certain types of application. SOL-9011 HAPs Free Thinner should be used for reduction. If a slower dry time is desired, use only SOL-9012 HAPs Free Retarder.
Application:
“V” Series White Conversion Varnish is designed for spray application. Temperature will effect viscosity. All products are designed to achieve the highest possible solids content at a viscosity low enough to allow proper spray atomization without the addition of costly chemical solvents. We recommend a coating system comprised of 2-3 coats of varnish at 3-4 mils wet film build per coat. For the first coat a high quality Conversion Vinyl Primer like Gem Prime White Precat prime or Gem Prime White C.V Primer may be substituted. Maximum dry film thickness should not exceed four mils.
Clean-up:
Use #500 Gem Coat Lacquer Thinner or SOL-9011 HAPs Free Lacquer Thinner to clean all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution.