Waterborne Coatings

gem.titan.can (small).jpgTitanium Waterborne High Solids Acrylic coatings are a single component, acrylic / urethane modified, high solids waterborne coatings system containing low levels of solvent allowing for reduction in VOCs and HAPs. Utilizing the latest waterborne technology, this system can be used as an introductory performance coating in areas where extreme water and chemical resistance are not necessary. Apply two or three coats, self-sealing, or if a sealer is desired, use two coats of Titanium Waterborne Sealer/Primer and one topcoat. This product meets all of the pertinent government regulations regarding emissions and meets or exceeds the performance parameters outlined by KCMA and ASTM

 

<<STEPS FOR APPLYING WATERBORNE COATINGS>>

Product Codes

Titanium Clear High Solids Acrylic/Urethane Modified 
 WB-0290  High Solids Clear Gloss (Available in Fives Only) 
WB-0260  High Solids Clear Semi-Gloss
WB-0230  High Solids Clear Satin
WB-0210  High Solids Clear Flat (Available in Fives Only)

Titanium Clear Waterborne Sealer  
WBS-0100  Clear Sealer

Titanium White High Solids Acrylic/Urethane Modified 
WB-1490  High Solids White Gloss (Available in 30 Gallon minimum batch sizes) 
WB-1460  High Solids White Semi-Gloss
WB-1430  High Solids White Satin
WB-1410  High Solids White Flat (Available in 30 Gallon minimum batch sizes)

Titanium White Waterborne Primer  
WBP-1100  White Primer

*Available in Gallons (unless otherwise noted), Fives and 55 Gallon Drums

Product Advantages

  • Low Odor
  • Provides Excellent Sandability
  • Quick Dry
  • Quick Stack Time
  • Excellent Film Building Properties
  • Excellent Flow and Leveling
  • Minimum Grain Raise
  • Non-Yellowing
  • Durable Moisture and Chemical Resistant Film
  • Meets KCMA and ASTM Performance Requirements

 

 

<< Back to 'Coatings'