Product Preparation & Application
Material Preparation:
This material is prepared at application viscosity and should require no thinning prior to use. However, if the conditions at your facility dictate that a thinner be incorporated we recommend the use of our SOL-9011 HAPs Free Thinner or SOL-9013 Non HAPs/Non VOC Thinner at levels not to exceed 10% by volume. Mix or agitate thoroughly before use.
Application:
Apply with conventional, air assisted airless, HVLP or airless equipment. For airless equipment, pressure may need to be increased due to high solids content. We recommend a coating system comprised of one coat of 210-0015 at 3-4 mils wet film build and 1-2 coats of topcoat at 3-4 mils wet film build. Total dry film build for the complete coating system should not exceed 4 mils.
Clean-up:
Use #500 Gem Coat Lacquer Thinner or SOL-9011 HAPs Free Lacquer Thinner to clean all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution.