Gem Seal® Conversion Sealer

21 Day PoLife @ 77°  F

gemcoat.combo (large).jpgGem Seal Conversion Sealer is a “best” quality vinyl sealer designed to prepare the substrate for a High Performance topcoat system. Gem Seal Conversion Sealer offers additional moisture and chemical resistance when used under virtually any Gemini High Performance topcoat. This product meets all of the pertinent government regulations regarding emissions and exceeds the performance parameters outlined by KCMA and ASTM.








Product Codes

210-0008  Gem Seal® Conversion Sealer 

MSDS      PDS 

*Available in Gallons (4 per case), Fives and 55 Gallon Drums

Product Preparation & Application


Material Preparation:   Catalyze Gem Seal Conversion Sealer with pre-packaged catalyst kit.  Mix or agitate thoroughly before use. Reduction may be required for certain types of application. SOL-9011 HAPs Free Thinner should be used for reduction. If slower dry time is required, only use SOL-9012 HAPs Free Retarder.

Application:   We recommend a coating system comprised of one coat of 210-0008 applied at 3-4 mils wet film build and 1-2 coats of topcoat applied at 3-4 mils wet film build.  Apply with conventional, air assisted airless, HVLP or airless equipment. For airless equipment, pressure may need to be increased due to high solids content.

Clean-up:   Use #500 Gem Coat Lacquer Thinner or SOL-9011 HAPs Free Lacquer Thinner to clean all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution. 

Product Advantages

  • HAPs Compliant 
  • AIM Compliant 
  • 21 Day Pot Life 
  • Water Clear
  • User Friendly
  • Excellent Moisture Resistance 
  • No Catalyst Required
  • Non-Yellowing*
  • No Critical Recoat Time
  • Dries "Smoother" Than Other Sealers Requiring Less Scuff Sanding
  • AWI TR-5 When Topcoated with Gem Var
  • Catalyst Supplied in Pre-Measured Containers
  • Passes KCMA Performance Requirements 
  • Passes ASTM Performance Requirements

* Clear non-yellowing coatings are formulated with resin systems and U.V. inhibitors designed to resist yellowing.  The coating will not protect wood, lightly stained wood substrates or pigmented basecoats from yellowing.  

 

 

<< Back to 'Clear Sealers'